Deutsch | English

Solar Lighting Systems for Streets and Objects

SPL Street Lamps

Advantages of the SPL Street Lamps

  • no cabling works
  • no energy costs
  • low maintenance effort
  • environmental-friendly
  • ease of assembly
  • innovative design
  • special battery-storage assures against vandalism and high temperature
  • technical components according to climatic conditions at the location
Advantages of the LED-Technology

Advantages of the LED-Technology

  • long durability of more than
    50 000 hours
  • high light efficiency
  • high robustness
  • LEDs cover the whole spectrum of colours

Solar powered Street Lamp "SPL130-Tropic-LED"

General characteristics

The solar street lamp "SPL130" is equipped with a solar module surface of 1,1 sqm. With a spot lights height of 7 m, streets can be illuminated up to a distance of about 25 m. The placement of the lighting units has to be chosen according to the type of reflector of 25–30 m in between.

With 35 Watt LED lamp operated:

  • Light flux: 2800 lm / lumen;
  • Light intensity at 1m from the ground: 22 lux;
  • Light emission cone diameter around 25 meter.

There are 2 ways to adjust the lights according to the climatic conditions:

  1. The selection of the lamps (powerful or reduced power);
  2. The selection of the lighting time per night (all night or for example 6 hours a night and 2 hours in the morning).

Design and construction

Design and construction

Light spreading

Light spreading

Technical characteristics

  1. 1 pcs. Mono crystalline silicon solar module with 135 Wp; Stable aluminium frame; Weight 14 kg; interconnecting water resistant plug.
  2. 1 pcs. intelligent energy- and lighting control system; Micro controller for fully automatic operation. The PWM battery charging has been optimized for long Battery life! Many specifications and simple to use.
  3. 1 pcs. Solar-gel-batterie (Pb); Absolutely maintenance free! Capacity: 130 Ah; Weight: 62 kg; Completely sealed valve regulated construction!
  4. 1 pcs. Special subterranean container made of poly-propylen; Including cable entry and protection cover with ventilation system of the accumulators; L × B × H: 650 × 250 × 350 mm; Weight: 12 kg, Protection: IP65.
  5. Complete wiring with UV steady wire 2 × 4 mm².
  6. 1 pcs. UV-stable aluminium housing Die-cast, corrosion resistant. Clear heat resisting glass cover; weight 8 kg.
  7. 1 pcs. Lamp 35W LED; power: 35W; Light Intensity: 2 800 lm; Middle lifespan: 50 000 hrs; Thread: E-40; Providing quick and save relamping!

Pole & module mount construction

  1. 1 pcs. Zinc galvanized tapered pole; Total height: 7,8 m; Spot lights height: 7,0 m; Weight: 90 kg. (The pole is placed on a foundation of 60 cm in diameter and of 1 m in length. The storage battery has to be fitted in into the shaft in a distance of about 1 m from the pole.)
  2. 1 pcs. Module mount, 360° rotatable, modul inclination of 15 degrees! Weight: 25 kg.

Inquiry
Give us a call. We are at your service!
Tel.: +43-3577-82330

ecoliGhts SOLARE BELEUCHTUNG GmbH
A-8741 Weißkirchen - Hopfgarten 18
Tel.: +43-3577-82330
Fax.: +43-3577-82330-44
E-Mail: info@ecoliGhts.at
technology from ecoliGhts ­ energy from the sun